|
How to Pair Multiple Transmitters to the Icon HD Net Ready
Posted by Support Supervisor, Last modified by Francesca Thompson on 07 August 2017 02:00 PM
|
- Please unpair the transmitters. To do this select 'Pair' and then select 'Back'. G1 should read 'Unpaired'.
- Do the same for G2.
- Next turn on the Nitrox setting on both G1 and G2.
- Next go into 'Pre Dive' mode.
- To see both G1 and G2 in Pre Dive mode, press the third button from the left.
- Next is the most important step: when you pair the first transmitter, the other transmitter needs to be 0.3 to 0.6 meters / 10 to 20 feet away.
- After the successful pairing of one transmitter it will be ok to pair the second one.
- If the transmitters are in close proximity, pair the first transmitter then wait three minutes to pair the second transmitter.
|
 (2 vote(s)) Helpful Not helpful
|
