Rechargeable batteries that are left unused over long periods of time
can reach a status of severe discharge. This in turn can lead to a
reduction in performance, both in that they may charge with difficulty
and also that they won't charge to full capacit...
* Go to Mares site: www.mares.com [https://www.mares.com], From the
menu select 'Service' then under 'Downloads' you will see 'Maps'.
* Choose the map for the specific country/region you need and
download it to your PC.
* Open the Dive Organizer and ...
To download dives from the Icon HD please see below:
* You must first download Dive Organizer for your PC or Diver's Diary
for your Mac from the Mares website's 'Download' section.
* Open the Dive Organizer/Divers Diary program.
* Connect the Icon ...
Sometimes the ICON HD DRIVER needs a manual repairing. In those cases
follow one of these methods.
-------------------------
REPAIRING BY THE DRIVER SETUP PROGRAM.
* Unplug the Icon from USB.
* From ADD/REMOVE APPLICATION panel, remove the entry ...
* You will first need to download Dive Organizer to your PC (take a
look at the official Mares website).
* After the DO program has been downloaded and opened you will need
to connect the charged Icon / Matrix (your Icon must be charged by at
least 25%...
ICON HD and ICON HD NET READY uses different hardware, as such their
battery consumption
is different - the latter is higher due to the increased complexity
of the electronic board.
After a deep discharge (i.e. Net Ready does not switch on when you
pre...
If you are noticing extremely long charge times, shorter than
expected battery life (see HERE [1] for a KB article on Icon HDs
battery life) or failure of Icon HD to respond to a charge process,
try the following sequence top to bottom.
- Always ens...
Q. What is the "factory reset" in Icon HD for?
A. This option is provided in order to solve some rare cases of
connection issues with the PC or Mac. To use it, choose "factory
reset" under "settings/about Icon HD". This re-initializes the Icon HD
(you do...
