ICON HD Net Ready versus ICON HD - Battery consumption
Posted by Gianluca Tedone, Last modified by Gianluca Tedone on 23 August 2012 07:58 AM
Icon HD and Icon HD Net Ready uses different hardware, as such their battery consumption|
is different – the latter is higher due to the increased complexity of the electronic board.
After a deep discharge (i.e. Net Ready does not switch on when you press a button),
you should let the unit recharge for 7 hours or so, regardless of the screen indications.
With a good recharge, the reported battery charge will be more reliable.
This is normal and happens for almost any battery operated device, like mobile phones.
If the device is operating correctly, you could expect an average discharge rate of 4% per day, roughly.